Range & Oven Repair in Jacksonville, FL
Gas, dual-fuel and electric ranges, wall ovens and cooktops. Serving Jacksonville and Duval County with same-day service.
Professional ranges are built around a heavy burner system and a calibrated oven cavity. When something goes wrong it's usually ignition, temperature control or airflow — not the whole appliance. The parts are serviceable and, on these brands, generally still available, which is why a range that cooks unevenly is a repair rather than a replacement.
We service gas, dual-fuel and electric ranges, rangetops, wall ovens and convection ovens, including the burner and oven electronics behind them.
Common range & oven problems we fix
- burner won't ignite
- uneven oven temperature
- convection fan failure
- control board / igniter replacement
- self-clean malfunction
What actually fails — and how we tell
Surface burner won't ignite
A spark module, electrode or ignition wire, or simply clogged burner ports. If one burner clicks but doesn't light, it's usually the port or electrode; if nothing clicks at all, the module.
Oven temperature off or uneven
A thermostat or sensor drifting out of tolerance, or a convection fan not moving air. This is the fault owners live with longest — a cake that browns on one side is a measurable, fixable calibration problem.
Oven igniter (gas)
A glow-bar or hot-surface igniter that has weakened will glow but not draw enough current to open the gas valve. Symptom: long preheat, a gas smell at start, or no bake with a working broiler.
Convection fan motor
Noise, or an oven that suddenly bakes like a conventional one. Motor and bearing wear is normal after years of heat cycling.
Door gaskets, hinges and springs
Heat loss at the door raises cook times and makes the top of the cavity run cooler than the bottom. On heavy pro doors, springs and hinges wear predictably.
Control boards on older units
Earlier oven generations use boards that fail with erratic displays or a cavity that ignores the setpoint. Sensors are tested first — they mimic board faults.
Brand-specific notes
Wolf
Gas Range (GR), Dual Fuel (DF), rangetops and M-series wall ovens. Dual-stacked sealed burners have their own ignition and port-cleaning routine, and oven calibration on dual-fuel models is a common, straightforward service.
Viking
Professional 5 and 7 Series ranges and rangetops, plus wall ovens. Spark module, oven igniter and thermostat work lead the call volume.
Sub-Zero
Sub-Zero doesn't build cooking equipment — a Sub-Zero kitchen paired with a pro range is almost always Wolf or Viking on the cooking side.
What moves the price on a range & oven
- Ignition components are inexpensive; control boards and convection assemblies are not.
- Whether the oven needs recalibration only, or a sensor and thermostat replaced.
- Pro ranges are heavy. Pulling one for rear access takes two people and protective work on the floor.
Typical ranges for every repair we do are published in our Jacksonville repair cost guide. Your exact price is always written down before work starts, and the diagnostic fee goes toward the repair once you approve it.
How a range & oven visit works
- 01
Call or book online
Tell us the appliance, the brand and what it's doing. We book a window that works for you — reach us at (904) 685-8556 or book online any time.
- 02
A technician arrives with parts
Your Jacksonville technician comes with diagnostic tools and the parts that fail most often on your appliance, so a large share of repairs finish on the first visit.
- 03
Diagnosis and a written quote
You get the actual fault explained in plain language and a written price before any work starts, with the diagnostic fee applied toward the repair once you approve it.
- 04
Repair, test and warranty
We complete the repair, verify the appliance under real operating conditions, and back the labour with our 90-day warranty.
Brands we service
Range & Oven repair across Jacksonville
We cover Jacksonville and Duval County — including these areas, each with its own page:
Related services
Range & Oven repair FAQ
One burner won't light but the others do.
Usually a clogged port or a cracked electrode on that burner — a same-visit repair in most cases.
My oven runs hot/cold compared to the dial.
That's a calibration or sensor issue. We measure actual cavity temperature against setpoint before adjusting or replacing anything.
The oven smells of gas before it lights.
Stop using it and call us. A weak igniter lets gas flow before ignition — it's a common fault with a simple fix, but it isn't something to keep using.
Do you service wall ovens as well as ranges?
Yes — single and double wall ovens, rangetops and convection models, gas, dual-fuel and electric.